|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||||||||||||||||
|
|
|
|
||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||
|
|
|
|
|
|
||||||||||||||||||||||||
|
|
|
|
|
|
||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||
|
|
|
|
|
|
||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
 |
BiographyHan Meijer is full professor in Polymer Technology. He received his Ph.D degree from the University of Twente in 1980 with the late prof. J.F. Ingen Housz as his supervisor. He joined DSM research, and was active in the area of Basic Research, Polymer Processing Modelling and Explorative Research. In 1985 he became part-time professor at the department of Polymer Chemistry and Technology in the area of Applied Rheology. In 1989 he became full professor in Polymer Technology in the group Fundamental Mechanics of the department of Mechanical Engineering. His present interests include structure development during flow and structure-property relations, micro-rheology and microfluidics , micro-macro-mechanics, modelling of polymer processing and design in polymers. And America's Cup sailing. Education
Refereed journal publications2012A. Sarhangi Fard, M.A. Hulsen, H.E.H. Meijer, N.M. Famili, P.D. Anderson, Adaptive non-Conformal Mesh Refinement and Extended Finite Element Method for Viscous Flow Inside Complex Moving Geometries, Int. J. Numer. Meth. Fluids, 68(8), 1031–1052, (2012)H.E.H. Meijer, M.K. Singh, P.D. Anderson, On the performance of static mixers: a quantitative comparison, Prog. Polym. Sci., 37, 1333–1349, (2012) L.C.A. van Breemen, L.E. Govaert, H.E.H. Meijer, Scratching polycarbonate, a quantitative model, Wear, 274, 238– 247, (2012) Y.J. Choi, M.A. Hulsen, H.E.H. Meijer, Simulation of the flow of a viscoelastic fluid around a stationary cylinder using an extended finite element method, Computers and Fluids, 57, 183–194, (2012) P.J.A. Janssen, H.E.H. Meijer, P.D. Anderson, Stability and breakup of confined threads, Phys. Fluids, 24(1), 012102, (2012) C. van der Walt, M.A. Hulsen, A.C.B. Bogaerds, H.E.H. Meijer, M.J.H. Bulters, Stability of fiber spinning under filament pull-out conditions, J. Non-Newtonian Fluid Mech., 175-1, 25-37, (2012) A. Sarhangi Fard, M.A. Hulsen, H.E.H. Meijer, N.M. Famili, P.D. Anderson, Tools to Simulate Distributive Mixing in Twin-Screw Extruders, Macromol. Theory Simul., 21(4), 217-240, (2012) 2011L.C.A. van Breemen, E.T.J. Klompen, L.E. Govaert, H.E.H. Meijer, Extending the EGP constitutive model for polymer glasses to multiple relaxation times, J. Mech. Phys. Solids, 59(10), 2191-2207, (2011)P.E. Neerincx, R.P.J. Denteneer, H.E.H. Meijer, A Fully Polymeric Mouldable Microfluidic Device. Part 1: The Process of Design, Macromol. Mater. Eng., 296(12), 1081-1090, (2011) P.E. Neerincx, .... Hellenbrand, H.E.H. Meijer, A Fully Polymeric Mouldable Microfluidic Device. Part 2: Designing the Process, Macromol. Symp., 296(12), 1091-1100, (2011) P.E. Neerincx, R.P.J. Denteneer, S. Peelen, H.E.H. Meijer, Compact Mixing Using Multiple Splitting, Stretching, and Recombining Flows, Macromol. Mater. Eng., 296, 349-361, (2011) T.A.P. Engels, L.C.A. van Breemen, L.E. Govaert, H.E.H. Meijer, Criteria to predict the embrittlement of polycarbonate, Polymer, 52, 1811-1819, (2011) H. Sobhani, MHR. Ghoreishy, R. Razavi, P.D. Anderson, H.E.H. Meijer, Modelling of polymer fluid flow and residence time distribution in twin screw extruder using fictitious domain method , Plastics, Rubber and Composites, 40(8), 387-396, (2011) J. Giboz, A.B. Spoelstra, G. Portale, T. Copponnex, H.E.H. Meijer, G.W.M. Peters, P. Mélé, On the origin of the ''core free'' morphology of a microinjection molded HDPE, J. Polym. Sci., Part B: Polym. Phys., 49(20), 1470-1478, (2011) P.D. Anderson, H.E.H. Meijer, Rheology, Mixing, and Flow of Polymeric Materials, Macromol. Mater. Eng., 296(3-4), 201-202, (2011) E. Sourty, K.Y. Tamminga, M.A.J. Michels, W.P. Vellinga, H.E.H. Meijer, The microstructure of petroleum vacuum residue films for bituminous concrete: a microscopic approach, J. Microlithography Microfabrication Microsystems, 241(2), 132-146, (2011) 2010Y.J. Choi, M.A. Hulsen, H.E.H. Meijer, An extended finite element method for the simulation of particulate viscoelastic flows, J. Non-Newtonian Fluid Mech., 165(11-12), 607–624, (2010)P.E. Neerincx, H.E.H. Meijer, A disposable bioreactor for culturing and testing of tissue-engineered heart valves, International Polymer Processing, 25(2), 1-10, (2010) C. Tufano, G.W.M. Peters, H.E.H. Meijer, P.D. Anderson, Effects of partial miscibility on drop-wall and drop-drop interactions, J. Rheol., 54(1), 159-183, (2010) F. Custodio, P.D. Anderson, G.W.M. Peters, A.M. Cunha, H.E.H. Meijer, Residual stresses in gas-assisted injection molding, Rheol Acta, 49(1), 23-44, (2010) E. Sourty, K.Y. Tamminga, M.A.J. Michels, W.P. Vellinga, H.E.H. Meijer, The microstructure of petroleum vacuum residue films for bituminous concrete: a microscopy approach, JoM, 241(2), 132-146, (2010) J.G.F. Wismans, J.A.W. van Dommelen, L.E. Govaert, H.E.H. Meijer, X-ray computed tomography based modelling of polymer foams, Materials Science Forum, 638-6, 2761-2765, (2010) 2009T.G. Kang, M.K. Singh, P.D. Anderson, H.E.H. Meijer, A chaotic serpentine mixer efficient in the creeping flow , Microfluidics and nanofluidics, 7(6), 783, (2009)J.W. Housmans, L. Balzano, D. Santoro, G.W.M. Peters, H.E.H. Meijer, A design to study flow induced crystallization in a multipass rheometer, International Polymer Processing, XXIV(2), 185-197, (2009) R. Forstner, G.W.M. Peters, H.E.H. Meijer, A novel dilatometer for PVT measurements of polymers at high cooling - and shear rates, International Polymer Processing, XXIV(2), 114-121, (2009) M.K. Singh, O.S. Galaktionov, H.E.H. Meijer, P.D. Anderson, A simplified approach to compute distribution matrices for the mapping method, Computers & Chemical Engineering, 33(3), 1354-1362, (2009) M.K. Singh, T.G. Kang, P.D. Anderson, H.E.H. Meijer, A.N. Hrymak, Analysis and Optimization of Low-Pressure Drop (LPD) Static Mixers, AIChE Journal, 55(9), 2208 - 2216, (2009) J.G.F. Wismans, J.A.W. van Dommelen, L.E. Govaert, B. van Rietbergen, H.E.H. Meijer, Computed tomography-based modeling of structured polymers, J. Cell. Plast., 45(2), 157-179, (2009) J.W. Housmans, L. Balzano, M. Adinolfi, G.W.M. Peters, H.E.H. Meijer, Dilatometry: A tool to measure the influence of cooling rate and pressure on the phase behavior of nucleated polypropylene, Macromol. Mater. Eng., 294(4), 231-243, (2009) J.W. Housmans, G.W.M. Peters, H.E.H. Meijer, Flow-Induced Crystallization of Propylene/Ethylene Random Copolymers, J. of Thermal Analysis & Calorimetry, 98(3), 693-705, (2009) P.E. Neerincx, H.E.H. Meijer, Gas-assisted injection moulding: adding two components and moveable inserts, Plastics, Rubber and Composites, 38(9-10), 444-452, (2009) T.A.P. Engels, B.A.G. Schrauwen, L.E. Govaert, H.E.H. Meijer, Improvement of the long-term performance of impact-modified polycarbonate by selected heat treatments, Macromol. Mater. Eng., 294(2), 114-121, (2009) F. Custodio, R.J.A. Steenbakkers, P.D. Anderson, G.W.M. Peters, H.E.H. Meijer, Model development and validation of crystallization behavior in injection molding prototype flows, Macromol. Theory Simul., 18(9), 469-494, (2009) H.E.H. Meijer, M.K. Singh, T.G. Kang, J.M.J. den Toonder, P.D. Anderson, Passive and Active Mixing in Microfluidic Devices, Macromol. Symp., 279(1), 201-209, (2009) T.A.P. Engels, L.C.A. van Breemen, L.E. Govaert, H.E.H. Meijer, Predicting the long-term mechanical performance of polycarbonate from thermal history during injection molding, Macromol. Mater. Eng., 294(12), 829-838, (2009) J.W. Housmans, R.J.A. Steenbakkers, P.C. Roozemond, G.W.M. Peters, H.E.H. Meijer, Saturation of pointlike nuclei and the transition to oriented structures in flow induced crystallization of isotactic polypropylene, Macromolecules, 42(15), 5728–5740, (2009) M.S. Hosseini, H. Nazockdasta, P.D. Anderson, H.E.H. Meijer, Simulation of agglomerate dispersion in a cubic cavity flow, Macromol. Theory Simul., 18(3), 201-208, (2009) J.W. Housmans, M. Gahleitner, G.W.M. Peters, H.E.H. Meijer, Structure-property relations in molded, nucleated isotactic polypropylene, Polymer, 50, 2304-2319, (2009) C. Tufano, G.W.M. Peters, P.C.J. Van Puyvelde, H.E.H. Meijer, Study of morphological hysteresis in partially miscible polymers, Rheol. Acta, 48(3), 343-358, (2009) T.A.P. Engels, L.E. Govaert, H.E.H. Meijer, The influence of molecular orientation on the yield and post-yield response of injection-molded polycarbonate, Macromol. Mater. Eng., 294(12), 821-828, (2009) M.K. Singh, P.D. Anderson, H.E.H. Meijer, Understanding and Optimizing the SMX mixer, Macromolecular Rapid Communications, 30, 362–376, (2009) R. Forstner, G.W.M. Peters, C. Rendina, J.W. Housmans, H.E.H. Meijer, Volumetric rheology of polymers: The influence of shear flow, cooling rate and pressure on the specific volume of iPP and P/E random copolymers, J. of Thermal Analysis & Calorimetry, 98(3), 683-691, (2009) 2008T.G. Kang, M.A. Hulsen, J.M.J. den Toonder, P.D. Anderson, H.E.H. Meijer, A direct simulation method for flows with suspended paramagnetic particles, J. Comput. Phys., 227(9), 4441–4458, (2008)R.P.M. Janssen, L.E. Govaert, H.E.H. Meijer, An analytical method to predict fatigue life of thermoplastics in uniaxial loading: sensitivity to wave type, frequency and stress amplitude, Macromolecules, 41, 2531-2540, (2008) C. Tufano, G.W.M. Peters, H.E.H. Meijer, Confined flow of polymer blends, Langmuir, 24(9), 4494-4505, (2008) R.P.M. Janssen, D. de Kanter, L.E. Govaert, H.E.H. Meijer, Fatigue Life Predictions for Glassy Polymers: A Constitutive Approach, Macromolecules, 41, 2520-2530, (2008) M.K. Singh, P.D. Anderson, M.F.M. Speetjens, H.E.H. Meijer, Optimizing the Rotated Arc Mixer , AIChE Journal, 54(11), 2809-2822, (2008) M.K. Singh, T.G. Kang, H.E.H. Meijer, P.D. Anderson, The mapping method as a toolbox to analyze, design, and optimize micromixers, Microfluidics and nanofluidics, 5(3), 313-325, (2008) C. Tufano, G.W.M. Peters, P.C.J. Van Puyvelde, H.E.H. Meijer, Transient interfacial tension and morphology evolution in partially miscible polymer blends, J. Colloid Interface Sci., 328(1), 48-57, (2008) C. Tufano, G.W.M. Peters, P.D. Anderson, H.E.H. Meijer, Transient interfacial tension of partially miscible polymers, J. Colloid Interface Sci., 325, 130-140, (2008) 2007C.G.N. Pelletier, E.C.A. Dekkers, L.E. Govaert, J.M.J. den Toonder, H.E.H. Meijer, The influence of indenter-surface misalignment on the results of instrumented indentation tests, Polym. Test., 26(7), 949-959, (2007)V. Khatavkar, P.D. Anderson, J.M.J. den Toonder, H.E.H. Meijer, Active micromixer based on artificial cilia, Phys. Fluids, 19, 083605, (2007) V. Khatavkar, P.D. Anderson, H.E.H. Meijer, Capillary spreading of a droplet in the partially wetting regime using a diffuse-interface model, J. Fluid Mech., 572, 367-387, (2007) T.G. Kang, M.A. Hulsen, P.D. Anderson, J.M.J. den Toonder, H.E.H. Meijer, Chaotic advection using passive and externally actuated particles in a serpentine channel flow, Chem. Eng. Sci., 62(23), 6677-6686, (2007) T.G. Kang, M.A. Hulsen, P.D. Anderson, J.M.J. den Toonder, H.E.H. Meijer, Chaotic mixing induced by a magnetic chain in a rotating magnetic field, Phys. Rev. E, 76(6), 066303, (2007) V. Khatavkar, P.D. Anderson, P.C. Duineveld, H.E.H. Meijer, Diffuse-Interface Modelling of Droplet Impact, J. Fluid Mech., 581, 97-127, (2007) R. Kandre, K. Feldmann, H.E.H. Meijer, P. Smith, D. Schlueter, Suzuki Polycondensation Put to Work: A Tough Poly(meta-phenylene) with a High Glass-Transition Temperature , Angewandte Chemie International Edition in English, 46(26), 4956-4959, (2007) 2006B.J. Keestra, P.D. Anderson, H.E.H. Meijer, 2K Injection molding of phase separating blends, International Polymer Processing, 02, 168-174, (2006)I. Barosan, P.D. Anderson, H.E.H. Meijer, Application of Mortar Elements to Diffuse-Interface Methods, Computers and Fluids, 35(10), 1384-1399, (2006) P.J.A. Janssen, P.D. Anderson, G.W.M. Peters, H.E.H. Meijer, Axisymmetric boundary integral simulations of film drainage between two viscous drops, J. Fluid Mech., 567, 65-90, (2006) L.E. Govaert, H.E.H. Meijer, DYFP2006, the 13th int. conference on deformation, yield and fracture of polymers, Applied Rheology, 16(5), 290-291, (2006) P.D. Anderson, D.J. Ternet, G.W.M. Peters, H.E.H. Meijer, Experimental/numerical analysis of chaotic advection in a three-dimensional cavity flow, International Polymer Processing, 04, 412-420, (2006) A.N. Zdravkov, G.W.M. Peters, H.E.H. Meijer, Film Drainage and Interfacial Instabilities in Polymeric Systems with Diffuse Interfaces, J. Colloid Interface Sci., 296(1), 86-94, (2006) W.R. Hwang, G.W.M. Peters, M.A. Hulsen, H.E.H. Meijer, Flow-Induced Crystallization of Particle-Filled Polymers, Macromolecules, 39(24), 8389-8398, (2006) I. Bazhlekov, P.D. Anderson, H.E.H. Meijer, Numerical investigation of the effect of insoluble surfactants on drop deformation and breakup in simple shear flow, J. Colloid Interface Sci., 298, 369-394, (2006) V. Khatavkar, P.D. Anderson, H.E.H. Meijer, On scaling of diffuse-interface models, Chem. Eng. Sc., 61(8), 2364-2378, (2006) T.A.P. Engels, L.E. Govaert, G.W.M. Peters, H.E.H. Meijer, Processing induced properties in glassy polymers: application of structural relaxation to yield stress development, J. Polym. Sci., Part B: Polym. Phys., 44(8), 1212-1225, (2006) M.H.E. van der Beek, G.W.M. Peters, H.E.H. Meijer, The influence of shear flow on the specific volume and the crystalline morphology of isotactic polypropylene, Macromolecules, 39(5), 1805-1814, (2006) E. Wisse, L.E. Govaert, H.E.H. Meijer, E.W. Meijer, Unusual Tuning of Mechanical Properties of Thermoplastic Elastomers using Supramolecular Fillers, Macromolecules, 39(21), 7425-7432, (2006) P.D. Anderson, J. Dooley, H.E.H. Meijer, Viscoelastic effects in multilayer polymer extrusion, Applied Rheology, 16(4), 198-205, (2006) 2005M.H.E. van der Beek, G.W.M. Peters, H.E.H. Meijer, A dilatometer to measure the influence of cooling rate and melt shearing on specific volume, International Polymer Processing, XX(2), 111-120, (2005)V. Khatavkar, P.D. Anderson, P.C. Duineveld, H.E.H. Meijer, Diffuse interface modeling of droplet impact, Macromolecular Rapid Communications, 26, 298-303, (2005) R. Escobar Galindo, H. Schut, A. van Veen, R. Rastogi, W.P. Vellinga, H.E.H. Meijer, Interface detection in poly-ethylene terephthalate-metal laminates using variable energy positron annihilation, Thin Solid Films, 478(1-2), 338-334, (2005) H.E.H. Meijer, L.E. Govaert, Mechanical performance of polymer systems: The relation between structure and properties, Prog. Polym. Sci., 30(8), 915-938, (2005) E.T.J. Klompen, T.A.P. Engels, L.E. Govaert, H.E.H. Meijer, Modelling of the post-yield response of glassy polymers: influence of thermomechanical history, Macromolecules, 38(16), 6997-7008, (2005) R.P. Schaake, W.P. Vellinga, J.M.J. den Toonder, H.E.H. Meijer, One minute wear rate measurement, Macromolecular Rapid Communications, 26(--), 188, (2005) L.E. Govaert, T.A.P. Engels, E.T.J. Klompen, G.W.M. Peters, H.E.H. Meijer, Processing-induced properties in glassy polymers: development of yield stress in polycarbonate, International Polymer Processing, XX(2), 170-177, (2005) E.T.J. Klompen, T.A.P. Engels, L.C.A. van Breemen, P.J.G. Schreurs, L.E. Govaert, H.E.H. Meijer, Quantitative prediction of long-term failure of Polycarbonate, Macromolecules, 38(16), 7009-7017, (2005) M.W.L. Wilbrink, M.A.J. Michels, W.P. Vellinga, H.E.H. Meijer, Rigidity percolation in dispersions with a structured visco-elastic matrix, Phys. Rev. E, 71(3), 031402, (2005) M.W.L. Wilbrink, M.A.J. Michels, W.P. Vellinga, H.E.H. Meijer, Rigidity percolation in dispersions with a structured viscoelastic matrix, Phys. Rev. E, 71(3), 031402, (2005) M.H.E. van der Beek, G.W.M. Peters, H.E.H. Meijer, The influence of cooling rate on the specific volume of isotactic polypropylene at elevated pressures, Macromol. Mater. Eng., 290(5), 443-455, (2005) G.W.M. Peters, A.N. Zdravkov, H.E.H. Meijer, Transient Interfacial Tension and Dilatational Rheology of Diffuse Polymer-Polymer, J. Chem. Phys., 122(10), 104901, (2005) 2004I. Bazhlekov, P.D. Anderson, H.E.H. Meijer, Boundary Integral Method for Deformable Interfaces in the Presence of Insoluble Surfactants, LNCS, 2907, 355-362, (2004)C.C. Puig, H.E.H. Meijer, M.A.J. Michels, L.H.G.J. Segeren, G.J. Vancso, Characterization of Glass Transition Temperature and Surface Energy of Bituminous Binders by Inverse gas Chromatography, Energy and Fuels, 18(1), 63-67, (2004) O.L.J. van Asselen, I.A. van Casteren, J.G.P. Goossens, H.E.H. Meijer, Deformation behavior of triblock copolymers based on polystyrene: an FT-IR spectroscopy study, Macromol. Symp., 205, 85-94, (2004) W.R. Hwang, M.A. Hulsen, H.E.H. Meijer, Direct simulation of particle suspensions in sliding bi-periodic frames, J. Comput. Phys., 194(1), 742-772, (2004) W.R. Hwang, M.A. Hulsen, H.E.H. Meijer, Direct simulations of particle suspensions in a viscoelastic fluid in sliding bi-periodic frames, J. Non-Newtonian Fluid Mech., 121(1), 15-33, (2004) Y.W. Kruijt-Stegeman, F.N. van de Vosse, H.E.H. Meijer, Droplet behavior in the presence of insoluble surfactants, Phys. Fluids, 16(8), 2785-2796, (2004) B.A.G. Schrauwen, R.P.M. Janssen, L.E. Govaert, H.E.H. Meijer, Intrinsic deformation behavior of semi-crystalline polymers, Macromolecules, 37(16), 6069-6078, (2004) I. Bazhlekov, P.D. Anderson, H.E.H. Meijer, Nonsingular boundary intergral method for deformable drops in viscous flows, Phys. Fluids, 16(4), 1064-1081, (2004) J.F. Vega, S. Rastogi, G.W.M. Peters, H.E.H. Meijer, Rheology and reptation of linear polymers. Ultra high molecular weight chain dynamics in the melt, J. Rheol., 48(3), 663-6778, (2004) B.A.G. Schrauwen, L.C.A. van Breemen, A.B. Spoelstra, L.E. Govaert, G.W.M. Peters, H.E.H. Meijer, Structure, deformation and failure of flow-oriented semi-crystalline polymers, Macromolecules, 37(23), 8618-8633, (2004) I.A. van Casteren, R.A.M. van Trier, J.G.P. Goossens, H.E.H. Meijer, P.J. Lemstra, The influence of hydrogen bonding on the preparation and mechanical properties of PS-diblock copolymer blends., J. Polym. Sci., Polym.Phys.Ed., 42(11), 2137-2160, (2004) R. Rastogi, W.P. Vellinga, S. Rastogi, C. Schick, H.E.H. Meijer, The Three-Phase Structure and Mechanical Properties of Poly(ethylene terephthalate), J. Polym. Sci., Polym.Phys.Ed., 42(11), 2092-9106, (2004) 2003H.G.H. van Melick, O.F.J.T. Bressers, J.M.J. den Toonder, L.E. Govaert, H.E.H. Meijer, A micro-indentation method for probing the craze-initiation stress in glassy polymers, Polymer, 44(8), 2481 - 2491, (2003)O.S. Galaktionov, P.D. Anderson, G.W.M. Peters, H.E.H. Meijer, Analysis and optimization of Kenics mixers, International Polymer Processing, XVIII(2), 138-150, (2003) B.J. Keestra, P.C.J. Van Puyvelde, P.D. Anderson, H.E.H. Meijer, Diffuse interface modeling of the morphology and rheology of immiscible polymer blends, Phys. Fluids, 15(9), 2567-2575, (2003) A.N. Zdravkov, G.W.M. Peters, H.E.H. Meijer, Film Drainage Between Two Captive Drops: PEO-Water in Silicon Oil, J. Colloid Interface Sci., 266(1), 195-201, (2003) H.G.H. van Melick, L.E. Govaert, B. Raas, W.J. Nauta, H.E.H. Meijer, Kinetics of ageing and re-embrittlement of mechanically rejuvenated polystyrene, Polymer, 44(4), 1171-1179, (2003) H.G.H. van Melick, L.E. Govaert, H.E.H. Meijer, Localisation phenomena in glassy polymers: influence of thermal and mechanical history, Polymer, 44(12), 3579-3591, (2003) H.E.H. Meijer, L.E. Govaert, Multi-scale analysis of mechanical properties of amorphous polymer systems, Macromol. Chem. Phys., 204(2), 274-288, (2003) H.G.H. van Melick, L.E. Govaert, H.E.H. Meijer, On the origin of Strain hardening in glassy polymers, Polymer, 44(8), 2493 - 2502, (2003) H.G.H. van Melick, L.E. Govaert, H.E.H. Meijer, Prediction of brittle-to-ductile transitions in polystyrene, Polymer, 44(2), 457-465, (2003) F.H.M. Swartjes, G.W.M. Peters, S. Rastogi, H.E.H. Meijer, Stress Induced Crystallization in Elongational Flow, International Polymer Processing, XVIII(1), 53 - 66, (2003) M.T.R. Moens, L.E. Govaert, G.W.M. Peters, H.E.H. Meijer, The thickness profile of UHMW-PE films during sequential biaxial drawing, Polymer Engng. & Sc., 43(1), 1, (2003) 2002G.W.M. Peters, F.H.M. Swartjes, H.E.H. Meijer, A Recoverable Strain based Model for Flow-induced Crystallization, Macromol. Symp., 185, 277-292, (2002)S. Tyagi, A. Ghosh, P. Montanari, G.W.M. Peters, H.E.H. Meijer, Linear Viscoelastic and Transient Behavior of Polypropylene and Ethylene vinyl acetate Blends. An Evaluation of the Linear Palierne and a Nonlinear Viscoelastic Model, Polymer Engng. & Sc., 42(11), 2107-2119, (2002) O.S. Galaktionov, P.D. Anderson, G.W.M. Peters, H.E.H. Meijer, Mapping approach for 3D laminar mixing simulations: application to industrial flows, Int. J. Numer. Meth. Fluids, 40(3-4), 345-351, (2002) P.D. Anderson, O.S. Galaktionov, G.W.M. Peters, H.E.H. Meijer, C.L. Tucker III, Material stretching in laminar mixing flows: extended mapping technique applied to the journal bearing flow, Int. J. Numer. Meth. Fluids, 40(1-2), 189-196, (2002) W.P. Vellinga, R. Rastogi, H.E.H. Meijer, Microscopic phenomenology of plastic deformation in polymer-metal laminates., Mat. Res. Soc. Symp. Proc., 695, 21-26, (2002) O.S. Galaktionov, P.D. Anderson, G.W.M. Peters, H.E.H. Meijer, Morphology Development in Kenics Static Mixers (Application of the Extended Mapping Method), CJCHE, 80(6), 604-613, (2002) H.G.H. van Melick, A..R. van Dijken, J.M.J. den Toonder, L.E. Govaert, H.E.H. Meijer, Near-surface mechanical properties of glassy polymers, Philos. Mag. A, 82(10), 2093-2102, (2002) Y.W. Stegeman, F.N. van de Vosse, H.E.H. Meijer, On the applicability of the Grace curve in practical mixing operations, CJCHE, 80(4), 632-637, (2002) W.W.G.J. van Pelt, J.G.P. Goossens, H.E.H. Meijer, P.J. Lemstra, Processing of intractable polymers using reactive solvents. 6. A new reactive solvent concept based on reversible depolymerisation, Polymer, 43(21), 5699-5708, (2002) B.A.G. Schrauwen, L.E. Govaert, G.W.M. Peters, H.E.H. Meijer, The influence of flow-induced crystallization on the impact toughness of high-density polyethylene, Macromol. Symp., 185(1), 89-102, (2002) 2001G.A.A.V. Haagh, G.W.M. Peters, F.N. van de Vosse, H.E.H. Meijer, A 3-D Finite Element Model for Gas-Assisted Injection Molding: Simulations and Experiments, Polymer Engng. & Sc., 41(3), 449-465, (2001)O.S. Galaktionov, P.D. Anderson, P.G.M. Kruijt, G.W.M. Peters, H.E.H. Meijer, A mapping approach for 3D distributive mixing analysis, Computers and Fluids, 30(3), 271-289, (2001) P.G.M. Kruijt, O.S. Galaktionov, P.D. Anderson, G.W.M. Peters, H.E.H. Meijer, Analyzing mixing in periodic flows by distribution matrices: Mapping method, AIChE Journal, 47(5), 1005-1015, (2001) I. Bazhlekov, F.N. van de Vosse, H.E.H. Meijer, Boundary Integral Method for 3D Simulation of Foam Dynamics, LNCS, 2179, 401-408, (2001) G.W.M. Peters, S.G. Hansen, H.E.H. Meijer, Constitutive Modeling of Dispersive Mixtures, J. Rheol., 45(3), 659-689, (2001) H. Zuidema, G.W.M. Peters, H.E.H. Meijer, Development and Validation of a Recoverable Strain Based Model for Flow-Induced Crystallization of Polymers, Macromol. Theory Simul., 10(5), 447-460, (2001) M. Verschueren, F.N. van de Vosse, H.E.H. Meijer, Diffuse-interface modelling of thermo-capillary flow instabilities in a Hele-Shaw cell, J. Fluid Mech., 434, 153-166, (2001) J.C. van der Hoeven, R. Wimberger-Friedl, H.E.H. Meijer, Homogeneity of Multilayers Produced With a Static Mixer, Polymer Engng. & Sc., 41(1), 32-42, (2001) O. van der Sluis, P.J.G. Schreurs, H.E.H. Meijer, Homogenisation of structured elastoviscoplastic solids at finite strains, Mech. Mat., 33, 499-522, (2001) H. Zuidema, G.W.M. Peters, H.E.H. Meijer, Influence of cooling rate on PVT-data of semi-crystalline polymers, Journal of Applied Polymer Science, 82, 1170-1186, (2001) B.J.P. Jansen, S. Rastogi, H.E.H. Meijer, P.J. Lemstra, Rubber-Modified Glassy Amorphous Polymers Prepared via Chemically Induced Phase Separation. 1. Morphology Development and Mechanical Properties, Macromolecules, 34, 3998-4006, (2001) B.J.P. Jansen, S. Rastogi, H.E.H. Meijer, P.J. Lemstra, Rubber-Modified Glassy Amorphous Polymers Prepared via Chemically Induced Phase Separation. 2. Mode of Microscopic Deformation Studied by in-Situ Small Angle X-ray Scattering during Tensile Deformation, Macromolecules, 34, 4007-4018, (2001) L.E. Govaert, H.G.H. van Melick, H.E.H. Meijer, Temporary toughening of polystyrene through mechanical pre-conditioning. , Polymer, 42(3), 1271-1274, (2001) P.G.M. Kruijt, O.S. Galaktionov, G.W.M. Peters, H.E.H. Meijer, The Mapping Method for Mixing Optimization. Part I: The Multiflux Static Mixer, International Polymer Processing, XVI(2), 151-160, (2001) P.G.M. Kruijt, O.S. Galaktionov, G.W.M. Peters, H.E.H. Meijer, The Mapping Method for Mixing Optimization. Part II: Transport in a corotating Twin Screw Extruder, International Polymer Processing, XVI(2), 161-171, (2001) 2000P.D. Anderson, O.S. Galaktionov, G.W.M. Peters, H.E.H. Meijer, Chaotic fluid mixing in non-quasi-static cavity flows, Int. J. Heat Fluid Flow, 21(2), 176-185, (2000)P.D. Anderson, H.E.H. Meijer, Chaotic mixing analyses by distribution matrices, Applied Rheology, 10(3), 119--133, (2000) L.H. Genieser, C.P. Hendriks, F.P.T. Baaijens, H.E.H. Meijer, Characterization of elastomer sliding behavior across silica and polydimethylsiloxane grafted surfaces., J. Rheol., 44(5), 1003-1017, (2000) U. Goschel, F.H.M. Swartjes, G.W.M. Peters, H.E.H. Meijer, Crystallization in isotactic polypropylene melts during contraction flow: time-resolved synchroton WAXD studies. , Polymer, 41, 1541-1550, (2000) P.D. Anderson, O.S. Galaktionov, F.N. van de Vosse, G.W.M. Peters, H.E.H. Meijer, Mixing of non-Newtonian fluids in time-periodic cavity flows, J. Non-Newtonian Fluid Mech., 93(2-3), 265--286, (2000) O. van der Sluis, P.J.G. Schreurs, W.A.M. Brekelmans, H.E.H. Meijer, Overall behaviour of heterogeneous elastoviscoplastic materials: effect of microstructural modelling, Mech. Mat., 32, 449-462, (2000) R.J.M. Smit, W.A.M. Brekelmans, H.E.H. Meijer, Predictive modelling of the properties and toughness of polymeric materials. Part 1: Why is polystyrene brittle and polycarbonate tough?, J. Mat. Sci., 35, 2855-2867, (2000) R.J.M. Smit, W.A.M. Brekelmans, H.E.H. Meijer, Predictive modelling of the properties and toughness of polymeric materials. Part II: Effect of microstructural properties on the macroscopic response of rubber-modified polymers., J. Mat. Sci., 35, 2869-2879, (2000) R.J.M. Smit, W.A.M. Brekelmans, H.E.H. Meijer, Predictive modelling of the properties and toughness of polymeric materials. Part III: Simultaneous prediction of micro- and macro-structural deformation of rubber-modified polymers., J. Mat. Sci., 35, 2881-2893, (2000) F.M. Mulder, B.J.P. Jansen, P.J. Lemstra, H.E.H. Meijer, H.J. de Groot, Pronounced Poly(Methyl Methacrylate) Dynamics Induced by Blending Morphology, Macromolecules, 33(2), 457-460, (2000) 1999P.D. Anderson, O.S. Galaktionov, G.W.M. Peters, H.E.H. Meijer, Analysis of mixing in three-dimensional time-periodic cavity flows, J. Fluid Mech., 386, 149--166, (1999)J.M.M. de Kok, H.E.H. Meijer, Deformation, Yield and Fracture of Unidirectional Composites in Transverse Loading 1: Influence of Fiber Fraction and Test-Temperature, Composites, Part A, 30(7), 905-916, (1999) O. van der Sluis, P.J.G. Schreurs, H.E.H. Meijer, Effective properties of a viscoplastic constitutive model obtained by homogenisation, Mech. Mat., 31(11), 743-759, (1999) O. van der Sluis, P. Vosbeek, P.J.G. Schreurs, H.E.H. Meijer, Homogenization of heterogeneous polymers, Int. J. Solids Structures, 36(21), 3193-3214, (1999) T.S. Krasnopolskaya, V.V. Meleshko, G.W.M. Peters, H.E.H. Meijer, Mixing in Stokes flow in an annular wedge cavity, Eur. J. Mech. B/Fluids, 18, 793-822, (1999) G.W.M. Peters, J.F.M. Schoonen, F.P.T. Baaijens, H.E.H. Meijer, On the performance of enhanced constitutive models for polymer melts in a cross-slot flow, J. Non-Newtonian Fluid Mech., 82, 387-427, (1999) R.J.M. Smit, W.A.M. Brekelmans, H.E.H. Meijer, Prediction of the large-strain mechanical response of heterogeneous polymer systems: local and global deformation behaviour of a representative volume element of voided polycarbonate, J. Mech. Phys. Solids, 47, 201-221, (1999) B.J.P. Jansen, K.Y. Tamminga, H.E.H. Meijer, P.J. Lemstra, Preparation of the thermoset rubbery epoxy particles as novel toughening modifiers for glassy epoxy resins, Polymer, 40, 5601-5607, (1999) B.J.P. Jansen, H.E.H. Meijer, P.J. Lemstra, Processing of (in)tractable polymers using reactive solvents. Part 5: morphology control during phase separation, Polymer, 40, 2917-2927, (1999) B.J.P. Jansen, S. Rastogi, H.E.H. Meijer, P.J. Lemstra, Rubber-Modified Glassy Amorphous Polymers Prepared via Chemically Induced Phase Separation.3. Influence of the Strain Rate on the Microscopic Deformation Mechanism, Macromolecules, 32, 6283-6289, (1999) B.J.P. Jansen, S. Rastogi, H.E.H. Meijer, P.J. Lemstra, Rubber-Modified Glassy Amorphous Polymers Prepared via Chemically INduced Phase Separation.4. Comparison of Properties of Semi-and Full-IPNs, and Copolymers of Acrylate-Aliphatic Epoxy Systems, Macromolecules, 32, 6290-6297, (1999) O.S. Galaktionov, V.V. Meleshko, G.W.M. Peters, H.E.H. Meijer, Stokes flow in a rectangular cavity with a cylinder, Fluid Dynamics Research, 24, 81-102, (1999) S.G. Hansen, G.W.M. Peters, H.E.H. Meijer, The effect of surfactant on the stability of a fluid filament embedded in a viscous fluid, J. Fluid Mech., 382, 331-349, (1999) V.V. Meleshko, O.S. Galaktionov, G.W.M. Peters, H.E.H. Meijer, Three-dimensional mixing in Stokes flow: the partitioned pipe mixer problem revisited, Eur. J. Mech. B/Fluids, 18, 783-792, (1999) 1998J.F.M. Schoonen, F.H.M. Swartjes, G.W.M. Peters, F.P.T. Baaijens, H.E.H. Meijer, A 3D Numerical/Experimental Study on a Stagnation Flow of a Polyisobuthylene Solution, J. Non-Newtonian Fluid Mech., 79(2-3), 529-561, (1998)R.J.M. Smit, W.A.M. Brekelmans, H.E.H. Meijer, Prediction of the mechanical behavior of nonlinear heterogeneous systems by multi-level finite element modeling, Comput. Methods. Appl. Mech. Engrg., 155, 181-192, (1998) J.G.P. Goossens, S. Rastogi, H.E.H. Meijer, P.J. Lemstra, Processing of (in)tractable polymers using reactive solvents. 4: Structure in the model system poly(ethylene) styrene, Polymer, 39(25), 6577-6588, (1998) 1997W.F. Zoetelief, G.W.M. Peters, H.E.H. Meijer, Numerical Simulation of the Multi-Component Injection Moulding Process, International Polymer Processing, 3, 216-227, (1997)G.A.A.V. Haagh, H. Zuidema, F.N. van de Vosse, G.W.M. Peters, H.E.H. Meijer, Towards a 3-D Finite Element Model for the Gas-Asisted Injection Moulding Process, International Polymer Processing, 12(3), 207-215, (1997) F.P.T. Baaijens, S.H.A. Selen, J.P.W. Baaijens, G.W.M. Peters, H.E.H. Meijer, Viscoelastic flow past a confined, J. Non-Newtonian Fluid Mech., 68, 173-203, (1997) 1996S. Vleeshouwers, H.E.H. Meijer, A rheological study of shear induced crystallization, Rheol. Acta, 35, 391-399, (1996)P.F.M. Meurs, P.J.G. Schreurs, A.A.J.M. Peijs, H.E.H. Meijer, Characterization of interphase conditions in composite materials, Composites, Part A, 27A(9), 781-786, (1996) A.B. Spoelstra, G.W.M. Peters, H.E.H. Meijer, Chemorheology of s Highly Filled Epoxy, Polymer Engng. & Sc., 36(16), 2153-2162, (1996) R.W. Venderbosch, A.A.J.M. Peijs, H.E.H. Meijer, P.J. Lemstra, Fibre-reinforced composites with tailored interphases using PPE/epoxy blends as a matrix system, Composites, Part A, 27A(9), 895-906, (1996) H.E.H. Meijer, R.W. Venderbosch, J.G.P. Goossens, P.J. Lemstra, Processing of thermoplastic polymers using reactive solvents, High Perform. Polym., 8, 133-167, (1996) G.A.A.V. Haagh, G.W.M. Peters, H.E.H. Meijer, Reaction Injection Molding: Analyzing the Filling Stage of a Complex Product With a Highly Viscous Thermoset, Polymer Engng. & Sc., 36(20), 2579-2588, (1996) S. Berghmans, H. Berghmans, H.E.H. Meijer, Spinning of hollow porous fibres via the TIPS mechanism, J. of Membrane Science, 116, 171-189, (1996) T.S. Krasnopolskaya, V.V. Meleshko, G.W.M. Peters, H.E.H. Meijer, Steady Stokes flow in an annular cavity, Quart. J. Mech. appl. Math., 49(4), 593-619, (1996) 1995J.M.H. Janssen, H.E.H. Meijer, A 2-Zone Model, Polymer Engng. & Sc., 35(22), 1766-1780, (1995)S. Berghmans, J. Mewis, H. Berghmans, H.E.H. Meijer, Phase behaviour and structure formation in solutions of poly(2,6-dimethyl-1,4-phenylene ether), Polymer, 36, 3085-3091, (1995) R.W. Venderbosch, H.E.H. Meijer, P.J. Lemstra, Processing of intractable polymers using reactive solvents: 2. Poly(2,6-dimethyl-1,4-phenylene ether) as a matrix material for high performance composites, Polymer, 36(6), 1167-1178, (1995) R.W. Venderbosch, H.E.H. Meijer, P.J. Lemstra, Processing of intractable polymers using reactive solvents: 3. Mechanical properties of poly(2,6-dimethyl-1,4-phenylene ether) processed by using various epoxy resin systems, Polymer, 36(15), 2903-2913, (1995) L.F.A. Douven, F.P.T. Baaijens, H.E.H. Meijer, The computation of properties of injection-moulded products, Prog. Polym. Sci., 20, 403-457, (1995) J.P.W. Baaijens, G.W.M. Peters, F.P.T. Baaijens, H.E.H. Meijer, Viscoelastic flow past a confined cylinder of a polyisobutylene solution, J. Rheol., 39, 1243-1277, (1995) 1994F.P.T. Baaijens, J.P.W. Baaijens, G.W.M. Peters, H.E.H. Meijer, An experimental and numerical investigation of a viscoelastic flow around a cylinder, J. Rheol., 38(2), 351-376, (1994)M.C.M. van de Sanden, H.E.H. Meijer, Deformation and toughness of polymeric systems: 4. Influence of strain rate and temperature, Polymer, 35(13), 2774-2782, (1994) M.C.M. van de Sanden, L.G.C. Buijs, F. de Bie, H.E.H. Meijer, Deformation and toughness of polymeric systems: 5. A critical examination of multilayered structures, Polymer, 35(13), 2783-2792, (1994) M.C.M. van de Sanden, H.E.H. Meijer, Deformation and toughness of polymeric systems: 6. Critical thickness of diluted entanglement networks, Polymer, 35(14), 2991-2994, (1994) M.C.M. van de Sanden, J.M.M. de Kok, H.E.H. Meijer, Deformation and toughness of polymeric systems: 7. Influence of dispersed rubbery phase, Polymer, 35(14), 2995-3004, (1994) P. Vandeweerdt, R. de Cooman, H. Berghmans, H.E.H. Meijer, Gel spinning of porous poly(methyl) fibres, Polymer, 35(23), 5141-5143, (1994) G.W.M. Peters, P.J.L. v.d. Velden, H.E.H. Meijer, Multilayer Injection Moulding, International Polymer Processing, IX, 258-264, (1994) R.W. Venderbosch, H.E.H. Meijer, P.J. Lemstra, Processing of intractable polymers using reactive solvents: 1. Poly (2,6-dimethyl-1,4-phenylene ether)/epoxy resin, Polymer, 35(20), 4349-4357, (1994) 1993J.M.H. Janssen, G.W.M. Peters, H.E.H. Meijer, An opposed jets device for studying the breakup of dispersed liquid-drops, Chem. Eng. Sci., 48(2), 255-265, (1993)M.C.M. van de Sanden, H.E.H. Meijer, P.J. Lemstra, Deformation and toughness of polymeric systems: part 1. The concept of a critical thickness, Polymer, 34(10), 2148-2154, (1993) M.C.M. van de Sanden, H.E.H. Meijer, T.A. Tervoort, Deformation and toughness of polymeric systems: Part 2. Influence of entanglement density, Polymer, 34(14), 2961-2970, (1993) M.C.M. van de Sanden, H.E.H. Meijer, Deformation and toughness of polymeric systems: Part 3. Influence of crosslink density, Polymer, 34(24), 5063-5072, (1993) J.M.H. Janssen, H.E.H. Meijer, Droplet break up mechanisms: Stepwise equilibrium versus transient dispersion, J. Rheol., 37(4), 597-608, (1993) R.W. Venderbosch, J.G.L. Nelissen, H.E.H. Meijer, P.J. Lemstra, Polymer blends based on epoxy resin and polyphenylene ether as a matrix material for high-performance composites, Makromol. Chem. Macromol. Symp., 75, 73-84, (1993) M.C.M. van de Sanden, H.E.H. Meijer, P.J. Lemstra, The ultimate toughness of polymers. The influence of network and microscopic structure, Progr. Colloid Polym., 92, 120-128, (1993) P.H.M. Elemans, H.L. Bos, J.M.H. Janssen, H.E.H. Meijer, Transient phenomena in dispersive mixing, Chem. Eng. Sc., 48, 267-276, (1993) M.C.M. van de Sanden, H.E.H. Meijer, Ultimate toughness of amorphous polymers, Makromol. Chem. Macromol. Symp., 75, 115-125, (1993) 1991J.G.M. van Gisbergen, H.E.H. Meijer, Influence of electron beam irradiation on the microrheology of incompatible polymer blends: Thread break-up and coalescence, J. Rheol., 35(1), 1539-1544, (1991)E. Vos, H.E.H. Meijer, G.W.M. Peters, Multilayer injection molding, International Polymer Processing, VI(1), 42-50, (1991) J.G.M. van Gisbergen, W.L.F. Hoeben, H.E.H. Meijer, Polypropylene/EPDM Blends: Melt Rheology, Polymer Engng. & Sc., 31(21), 1539-1544, (1991) 1990M.J.H. Bulters, H.E.H. Meijer, Analogy between the modelling of pullout in solution spinning and the prediction of the vortex size in constraction flows, J. Non-Newtonian Fluid Mech., 38, 43-80, (1990)C.W.M. Bastiaansen, H.E.H. Meijer, P.J. Lemstra, Memory effects in polyethylenes : influences of processing and crystallization history., Polymer, 31, 1435-1440, (1990) P.H.M. Elemans, H.E.H. Meijer, Modelling of Continuous Mixers. Part 2: The Buss Cokneader, Polymer Engng. & Sc., 30, 893-904, (1990) P.H.M. Elemans, J.M.H. Janssen, H.E.H. Meijer, The measurement of interfacial tension in polymer/polymer systems:, J. Rheol., 34(8), 1311-1325, (1990) 1989C.P.J.M. Verbraak, H.E.H. Meijer, Screw Design in Injection Moulding, Polymer Engng. & Sc., 29(7), 479-487, (1989)J.G.M. van Gisbergen, H.E.H. Meijer, P.J. Lemstra, Structured Polymer Blends: 2. Processing of PP/EPDM blends : controlled rheology and morphology fixation via elec-tron beam radiation, Polymer, 30, 2153-2157, (1989) 1988H.E.H. Meijer, P.H.M. Elemans, Modelling of Continuous Mixers. Part 1: The corotating Twinscrew Extruder, Polymer Engng. & Sc., 28(5), 275-290, (1988)H.E.H. Meijer, C.P.J.M. Verbraak, On the Modelling of Extrusion with Slip Boundary Conditions, Polymer Engng. & Sc., 28(11), 758-772, (1988) H.E.H. Meijer, P.J. Lemstra, P.H.M. Elemans, Structured Polymer Blends, Makromol. Chem. Macromol. Symp., 16, 113-135, (1988) 1986P.J. Lemstra, C.W.M. Bastiaansen, H.E.H. Meijer, Chain extended flexible polymers., Die Angewandte Makro Mol. Chem., 145, 343-358, (1986)1983J.J.M. Cormont, H.E.H. Meijer, H. Herrmann, N. Herres, Wirtschaftliches Herstellen gefƒØllter Polypropylen Platten, Kunstst., 73(10), 599, (1983)1981J.F. Ingen Housz, H.E.H. Meijer, The Melting Performance of Single Screw Extruders. Part 1., Polymer Engng. & Sc., 21, 352-359, (1981)J.F. Ingen Housz, H.E.H. Meijer, The Melting Performance of Single Screw Extruders. Part 2., Polymer Engng. & Sc., 21, 1156, (1981) 1978H.E.H. Meijer, W.C.M. Gorissen, J.F. Ingen Housz, Temperature Development in the Leakage Flow of Screw Extruders, Polymer Engng. & Sc., 18, 292, (1978)More publicationsAn extended list of publications of Han Meijer can be found here. |
||||||||||
