|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||||||||||||||||
|
|
|
|
||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||
|
|
|
|
|
|
||||||||||||||||||||||||
|
|
|
|
|
|
||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||
|
|
|
|
|
|
||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||
 |
BiographyFrank Baaijens is full professor in Soft Tissue Biomechanics & Tissue Engineering. He received his PhD degree from the Eindhoven University of Technology in 1987 with prof. J.D. Janssen as his supervisor. In 1985 he joined Philips Research Laboratories in Eindhoven to work on Computational Mechanics. Since 1990 he has been part time professor in the Polymer Group of the division of Computational and Experimental Mechanics of the Eindhoven University of Technology, in the area of Computational Rheology. In july 1995 he was appointed full professor in the Department of Mechanical Engineering. In October 2002 he was appointed full professor in the Department of BioMedical Engineering (division of Biomechanics and Tissue Engineering). From 2003-2007 he was Dean of the Department of Biomedical Engineering, and he is currently Scientific Director of the national research program on BioMedical Materials (BMM). His current research focusses on soft tissue biomechanics and tissue engineering. Education
Refereed journal publications2012I. Dimakopoulos, A.C.B. Bogaerds, P.D. Anderson, M.A. Hulsen, F.P.T. Baaijens, Direct numerical simulation of a 2d stented aortic heart valve at Physiological flow rates, Comp. Meth. Biomech. & Biomed. Engng., -, In press, (2012)F. Kraaijeveld, J.M.R.J. Huyghe, J.J.C. Remmers, R. de Borst, F.P.T. Baaijens, Shearing in poroelastic fully saturated media: a mesh-independent model., Engng. Fracture Mech., 0, submitted, (2012) 2011M.L.P. Langelaan, KJM. Boonen, K.Y. Rosaria-Chak, D.W.J. van der Schaft, F.P.T. Baaijens, M.J. Post, Advanced maturation by electrical stimulation: Differences in response between C2C12 and primary muscle progenitor cells , J Tissue Eng Regen Med, 5(7), 529-39, (2011)M.A.A. van Vlimmeren, A. Driessen - Mol, C.W.J. Oomens, F.P.T. Baaijens, An in vitro model system to quantify stress generation, compaction and retraction in engineered heart valve tissue, Tissue Eng Part C: Methods, 17(10), 983-991, (2011) S.D. Dams, M. de Liefde - van Beest, A.M. Nuijs, C.W.J. Oomens, F.P.T. Baaijens, Heat shocks enhance procollagen type I and III expression in fibroblasts in ex-vivo human skin, Skin Res Technol, 17(2), 167 - 180, (2011) S. Loerakker, L. Solis, D.L. Bader, F.P.T. Baaijens, VK. Mushahwar, C.W.J. Oomens, How does muscle stiffness affect the internal deformations within the soft tissue layers of the buttock under constant loading, Comp. Meth. Biomech. & Biomed. Engng., -(-), accepted, (2011) M. Geerligs, L.C.A. van Breemen, G.W.M. Peters, P.A.J. Ackermans, F.P.T. Baaijens, C.W.J. Oomens, In vitro indentation to determine the mechanical properties of epidermis, J. Biomech., 44, 1176-1181, (2011) KJM. Boonen, D.W.J. van der Schaft, F.P.T. Baaijens, M.J. Post, Interaction between electrical stimulation, protein coating and matrix elasticity: a complex effect on muscle fibre maturation, Journal of TERM, 5(1), 60-8, (2011) S. Loerakker, C.W.J. Oomens, E. Manders, T. Schakel, D.L.. Bader, F.P.T. Baaijens, K. Nicolay, G.J. Strijkers, Ischaemia-reperfusion injury in rat skeletal muscle assessed with T2-weighted and dynamic contrast-enhanced MRI, Magn Reson Med, 66(2), 528-537, (2011) M. Geerligs, C.W.J. Oomens, P.A.J. Ackermans, F.P.T. Baaijens, G.W.M. Peters, Linear shear response of the upper skin layers , Biorheology, 48(3,4), 229-245, (2011) M.A.A. van Vlimmeren, A. Driessen - Mol, C.W.J. Oomens, W.J.T. Janssen - van den Broek, R. Stoop, C.V.C. Bouten, F.P.T. Baaijens, Low oxygen concentrations impair tissue development in tissue-engineered cardiovascular constructs, Tissue Eng Part A, In pr(-), -, (2011) D.W.J. van der Schaft, A.C.C. van Spreeuwel, H.C. van Assen, F.P.T. Baaijens, Mechanoregulation of vascularization in aligned tissue-engineered muscle: a role for vascular endothelial growth factor., Tissue Eng Part A, 17(21-22), 2857-2865, (2011) C.V.C. Bouten, P.Y.W. Dankers, A. Driessen - Mol, S. Pedron, A.M. Brizard, F.P.T. Baaijens, Substrates for cardiovascular tissue engineering, Advanced Drug Delivery Reviews, 63(4-5), 221-241, (2011) S. Loerakker, E. Manders, G.J. Strijkers, K. Nicolay, F.P.T. Baaijens, D.L. Bader, C.W.J. Oomens, The effects of deformation, ischaemia and reperfusion on the development of muscle damage during prolonged loading, J. Appl. Phys., 111(4), 1168-1177, (2011) S. Loerakker, D.L. Bader, F.P.T. Baaijens, C.W.J. Oomens, Which factors influence the ability of a computational model to predict the in vivo deformation behaviour of skeletal muscle, Comp. Meth. Biomech. & Biomed. Engng., -(-), in press, (2011) 2010M.A.A. van Vlimmeren, A. Driessen - Mol, W.J.T. Janssen - van den Broek, C.V.C. Bouten, F.P.T. Baaijens, Controlling matrix formation and cross-linking by hypoxia in cardiovascular tissue engineering, J. Appl. Physiol., 109(-), 1483-1491, (2010)M. Geerligs, G.W.M. Peters, P.A.J. Ackermans, C.W.J. Oomens, F.P.T. Baaijens, Does subcutaneous adipose tissue behave as an (anti-)thyxotropic material?, J. Biomech., 43(6), 1153-1159, (2010) KJM. Boonen, M.L.P. Langelaan, R.B. Polak, D.W.J. van der Schaft, F.P.T. Baaijens, M.J. Post, Effects of a combined mechanical stimulation protocol: Value for skeletal muscle tissue engineering, J. Biomech., 43(8), 1514/21, (2010) A. Driessen - Mol, C.V.C. Bouten, F.P.T. Baaijens, Instructive materials for functional tissue engineering, Macromol Biosci, 10(11), 1283-1284, (2010) M.L.P. Langelaan, KJM. Boonen, R.B. Polak, F.P.T. Baaijens, M.J. Post, D.W.J. van der Schaft, Meet the new meat: tissue engineered skeletal muscle, Trends Food Sci Technol, 21(2), 59-66, (2010) Dö. Schmidt, P.E. Dijkman, A. Driessen - Mol, R. Stenger, C. Mariani, A. Puolakka, M. Rissanen, T. Deichmann, B. Odermatt, B. Weber, M.Y. Emmert, G. Zund, F.P.T. Baaijens, S. Hoerstrup, Minimally invasive implantation of living tissue engineered heart valves, JACC, 56(6), 510-520, (2010) F.P.T. Baaijens, C.V.C. Bouten, N.J.B. Driessen, Modeling collagen remodeling, J. Biomech., 43(1), 166-175, (2010) S.D. Dams, M. de Liefde - van Beest, A.M. Nuijs, C.W.J. Oomens, F.P.T. Baaijens, Pulsed heat shocks enhance procollagen type I and procollagen type III expression in human dermal fibroblasts, Skin Res Technol, 16(-3), 354-364, (2010) S. Loerakker, A. Stekelenburg, G.J. Strijkers, J.J.M. Rijpkema, F.P.T. Baaijens, D.L. Bader, K. Nicolay, C.W.J. Oomens, Temporal effects of mechanical loading on deformation-induced damage in skeletal muscle tissue, Ann. Biomed. Eng., 38(8), 2577-2587, (2010) M.A.J. Cox, J. Kortsmit, N.J.B. Driessen, C.V.C. Bouten, F.P.T. Baaijens, Tissue engineered heart valves develop native-like collagen fiber architecture, Tissue Eng Part A, 16(5), 1527-1537, (2010) 2009K.K. Ceelen, C.W.J. Oomens, A. Stekelenburg, D.L. Bader, F.P.T. Baaijens, Changes in intracellular calcium during compression, Experimental Mechanics, 49(1), 25 - 33, (2009)J. Kortsmit, M.C.M. Rutten, M.W. Wijlaars, F.P.T. Baaijens, Deformation-Controlled Load Application in Heart Valve Tissue Engineering, Tissue Eng Part C: Methods, 15(4), 707-716, (2009) M. Stekelenburg, M.C.M. Rutten, L. Snoeckx, F.P.T. Baaijens, Dynamic Straining Combined with Fibrin Gel Cell Seeding Improves Strength of Tissue-Engineered Small-Diameter Vascular Grafts, Tissue Eng Part A, 15(5), 1081-1089, (2009) K.J.M. Boonen, K.Y. Rosaria - Chak, F.P.T. Baaijens, D.W.J. van der Schaft, M.J. Post, Essential environmental cues from the satellite cell niche: Optimizing proliferation and differentiation., Am J Physiol, 296(-6), -C1338-45, (2009) A. Balguid, A. Driessen - Mol, M.A.A. van Vlimmeren, F.P.T. Baaijens, C.V.C. Bouten, Hypoxia induces near-native mechanical properties of engineered heart valve tissue, Circulation, 119(-), 290-297, (2009) M.P. Rubbens, A. Driessen - Mol, R.A. Boerboom, R.A. Bank, F.P.T. Baaijens, C.V.C. Bouten, Intermittent straining accelerates the development of tissue properties in engineered heart valve tissue, Tissue Eng Part A, 15(5), 999-1008, (2009) F.P.T. Baaijens, C.V.C. Bouten, N.J.B. Driessen, Modeling collagen remodeling, J. Biomech., -(-), available online, 20, (2009) J. Kortsmit, N.J.B. Driessen, M.C.M. Rutten, F.P.T. Baaijens, Nondestructive and Noninvasive Assessment of Mechanical Properties in Heart Valve Tissue Engineering, Tissue Eng Part A, 15(4), 797-806, (2009) M.P. Rubbens, A. Driessen - Mol, R.A. Boerboom, M. Koppert, H.C. van Assen, B.M. ter Haar Romenij, F.P.T. Baaijens, C.V.C. Bouten, Quantification of the temporal evolution of collagen orientation in mechanically conditioned engineered cardiovascular tissues, Annals of Biomed.Eng., 37(7), 1263-1272, (2009) J. Kortsmit, N.J.B. Driessen, M.C.M. Rutten, F.P.T. Baaijens, Real Time, Non-Invasive Assessment of Leaflet Deformation in Heart Valve Tissue Engineering, Ann. Biomed. Eng., 37(3), 532-541, (2009) M.P. Rubbens, A. Driessen - Mol, M.H. van Marion, R. Hanemaaijer, R.A. Bank, F.P.T. Baaijens, C.V.C. Bouten, Straining-mode dependent collagen remodeling in engineered cardiovascular tissues, Tissue Eng Part A, 15(4), 841-849, (2009) A. Balguid, A. Driessen - Mol, M.H. van Marion, R.A. Bank, C.V.C. Bouten, F.P.T. Baaijens, Tailoring fiber diameter in electrospun PCL scaffolds for optimal cellular infiltration in cardiovascular tissue engineering, Tissue Eng Part A, 15(2), 437-444, (2009) R.A.A. Pullens, M. Stekelenburg, F.P.T. Baaijens, M.J. Post, The influence of endothelial cells on the ECM composition of 3D engineered cardiovascular constructs., J Tissue Eng Regen Med, 3(1), 11-8, (2009) L.H. Cornelissen, D. Bronneberg, D.L. Bader, F.P.T. Baaijens, C.W.J. Oomens, The transport profile of cytokines in epidermal equivalents subjected to mechanical loading, Ann. Biomed. Eng., 37(5), 1007-1018, (2009) A. Driessen - Mol, A.I.P.M. Smits, C.V.C. Bouten, F.P.T. Baaijens, Tissue engineering of heart valves: advances and current challenges, Expert Reviews Medical Devices, 6(3), 259-275, (2009) 2008K.K. Ceelen, A. Stekelenburg, S. Loerakker, G.J. Strijkers, D.L. Bader, K. Nicolaij, F.P.T. Baaijens, C.W.J. Oomens, Compresion-induced damage and internal tissue strains are related, J. Biomech., 41(16), 3399-3404, (2008)L.H. Cornelissen, D. Bronneberg, C.W.J. Oomens, F.P.T. Baaijens, Diffusion measurements in epidermal tissues with fluorescent recovery after photobleaching, Skin Res Technol, 14(4), 462-467, (2008) R.A. Boerboom, M.P. Rubbens, N.J.B. Driessen, C.V.C. Bouten, F.P.T. Baaijens, Effect of strain magnitude on the tissue properties of engineered cardiovascular structures, Annals of Biomed.Eng., 36(2), 244-253, (2008) L. Klouda, C.M. Vaz, A. Driessen - Mol, F.P.T. Baaijens, C.V.C. Bouten, Effect or biomimetic conditions on mechanical and structural integrity of PGA/P4HB and electrospun PCL scaffolds, J. of Mat. Sc.: Mat. in Med., 19, 1137-1144, (2008) Y. Schröder, S.J. Elliot, W. Wilson, F.P.T. Baaijens, J.M.R.J. Huyghe, Experimental and model determination of human intervertebral disc osmoviscoelasticity, J. of Orthop. Res., 26(8), 1141-1146, (2008) M. Geerligs, G.W.M. Peters, P.A.J. Ackermans, C.W.J. Oomens, F.P.T. Baaijens, Linear viscoelastic behavior of subcutaneous adipose tissue, Biorheology, 45(6), 677-688, (2008) A. Driessen - Mol, M.P. Rubbens, M. Stekelenburg, F.P.T. Baaijens, Living heart valve and small-diameter artery substitutes - an emerging field for intellectual property development, Recent Patents on Biotechnology, 2(1), 1-9, (2008) M.A.J. Cox, N.J.B. Driessen, R.A. Boerboom, C.V.C. Bouten, F.P.T. Baaijens, Mechanical characterization of anisotropic planar biological soft tissues using finite indentation: experimental feasibility, J. Biomech., 41(2), 422-429, (2008) K.K. Ceelen, C.W.J. Oomens, F.P.T. Baaijens, Microstructural analysis of deformation-induced hypoxic damage in skeletal muscle, Biomech Mod Mechanobiol, 7(4), 277-284, (2008) N.J.B. Driessen, M.A.J. Cox, C.V.C. Bouten, F.P.T. Baaijens, Remodeling of the angular collagen fiber distribution in cardiovascular tissues, Biomech Mod Mechanobiol, 7, 93-103, (2008) A. Balguid, N.J.B. Driessen, A. Driessen - Mol, J.P.J. Schmitz, F. Verheyen, C.V.C. Bouten, F.P.T. Baaijens, Stress related collagen ultrastructure in human aortic valves - implications for tissue engineering, J. Biomech., 41, 2612-2617, (2008) D. Gawlitta, K.J.M. Boonen, C.W.J. Oomens, F.P.T. Baaijens, C.V.C. Bouten, The influence of serum-free culture conditions on skeletal muscle differentiation in a tissue-engineered model, Tissue Engineering, Part(1), 161-171, (2008) M.A.J. Cox, D. Gawlitta, N.J.B. Driessen, C.W.J. Oomens, F.P.T. Baaijens, The non-linear mechanical properties of soft engineered biological tissues determined by finite spherical indentation , Comp. Meth. Biomech. & Biomed. Engng., 11(5), 585-592, (2008) S.H.M. Söntjens, R.A.E. Renken, G.M.L. van Gemert, T.A.P. Engels, A.W. Bosman, H.M. Janssen, L.E. Govaert, F.P.T. Baaijens, Thermoplastic Elastomers based on Strong and Well-Defined Hydrogen-Bonding Interactions, Macromolecules, 41(15), 5703-5708, (2008) K.K. Ceelen, A. Stekelenburg, J.L.J. Mulders, F.P.T. Baaijens, C.W.J. Oomens, Validation of a dedicated finite element model of skeletal muscle compression with MR tagging measurements, J. Biomech. Eng., 130(6), 061015 (1 - 7), (2008) 2007Y. Schröder, S. Sivan, W. Wilson, J.M.R.J. Huyghe, A. Maroudas, F.P.T. Baaijens, Y. Merkher, Are disc pressure, stress and osmolarity affected by intra and extrafibrillar fluid exchange, J. of Orthop. Res., 25(10), 1317-1324, (2007)D. Bronneberg, S.W. Spiekstra, L.H. Cornelissen, C.W.J. Oomens, S. Gibbs, F.P.T. Baaijens, C.V.C. Bouten, Cytokine and chemokine release upon prolonged mechanical loading of the epidermis, Exp. Dermatol., 16(7), 567-579, (2007) L.H. Cornelissen, C.W.J. Oomens, J.M.R.J. Huyghe, F.P.T. Baaijens, Mechanisms that play a role in the maintenance of the calcium gradient in the epidermis, Skin Res Technol, 13(4), 369-376, (2007) N.J.B. Driessen, A. Driessen - Mol, C.V.C. Bouten, F.P.T. Baaijens, Modeling the mechanics of tissue-engineered human heart valve leaflets, J. Biomech., 40(2), 325-334, (2007) J.M.R.J. Huyghe, M.M. Molenaar, F.P.T. Baaijens, Poromechanics of compressible charged porous media using the theory of mixtures, J. Biomech. Eng., 129, 776-785, (2007) D. Gawlitta, C.W.J. Oomens, D.L. Bader, F.P.T. Baaijens, C.V.C. Bouten, Temporal differences in the influence of ischemic factors and deformation on the metabolism of engineered skeletal muscle, J. Appl. Physiol., 103(2), 464-473, (2007) D. Gawlitta, W. Li, C.W.J. Oomens, F.P.T. Baaijens, D.L. Bader, C.V.C. Bouten, The relative contributions of compression and hypoxia to development of muscle tissue damage: an in vitro study, Ann. Biomed. Eng., 35(2), 273-284, (2007) A. Balguid, M.P. Rubbens, A. Driessen - Mol, R.A. Bank, A.J.J.C. Bogers, J.P. van Kats, B.A.J.M. de Mol, F.P.T. Baaijens, C.V.C. Bouten, The role of collagen cross-links in biomechanical behavior of human aortic heart valve leaflets: Relevance for tissue engineering, Tissue Engineering, 13(7), 1501-1511, (2007) 2006M.I. van Lieshout, G.W.M. Peters, M.C.M. Rutten, F.P.T. Baaijens, A knitted, fibrin covered polycaprolactone scaffold for tissue engineering of the aortic valve, Tissue Engineering, 12(3), 481-487, (2006)D. Bronneberg, C.V.C. Bouten, C.W.J. Oomens, P.M. van Kemenade, F.P.T. Baaijens, An in vitro model system to study the damaging effects of prolonged mechanical loading of the epidermis, Annals of Biomed.Eng., 34(3), 506-514, (2006) A. Driessen - Mol, M.C.M. Rutten, N.J.B. Driessen, C.V.C. Bouten, G. Zund, F.P.T. Baaijens, S. Hoerstrup, Autologous human tissue-engineered heart valves: prospects for systemic applications, Circulation, 114(sup I), I152-8, (2006) M.I. van Lieshout, C.M. Vaz, M.C.M. Rutten, G.W.M. Peters, F.P.T. Baaijens, Electrospinning versus knitting: two scaffolds for tisssue engineering of the aortic valve, J. Biomater. Sci., Polym. Ed., 17(1-2), 77-89, (2006) S. Wognum, J.M.R.J. Huyghe, F.P.T. Baaijens, Influence of osmotic pressure changes on the opening of existing cracks in two intervertebral disc models, Spine, 31(16), 1783-1788, (2006) M.A.J. Cox, N.J.B. Driessen, C.V.C. Bouten, F.P.T. Baaijens, Mechanical characterization of anisotropic planar biological soft tissues using large indentation: A computational feasibility study, J. Biomech. Eng., 128(3), 428-436, (2006) Y. Schröder, W. Wilson, J.M.R.J. Huyghe, F.P.T. Baaijens, Osmoviscoelastic finite element model of the intervertebral disc, European Spine Journal, 15(Suppl), 361-371, (2006) J.M.R.J. Huyghe, S. Wognum, F.P.T. Baaijens, Point of View - Response', Spine, 31(16), E527, (2006) F.M. Hendriks, D. Brokken, C.W.J. Oomens, D.L. Bader, F.P.T. Baaijens, The relative contributions of different skin layers to the mechanical behaviour of human skin in vivo using suction experiments, Med. Eng. Phys., 28(3), 259-266, (2006) 2005B.G. Sengers, C.C. van Donkelaar, C.W.J. Oomens, F.P.T. Baaijens, A computational study of culture conditions and nutrient supply in cartilage tissue engineering, Biotechnology Progress, 21(-), 1252-1261, (2005)N.J.B. Driessen, C.V.C. Bouten, F.P.T. Baaijens, A structural constitutive model for collagenous cardiovascular tissues incorporating the angular fiber distribution, J. Biomech. Eng., 127(3), 494-503, (2005) R. van Loon, P.D. Anderson, F.P.T. Baaijens, F.N. van de Vosse, A three-dimensional fluid-structure interaction method for heart valve modelling, C. R. Mecanique, 333(12), 856-866, (2005) C.M. Vaz, S. van Tuijl, C.V.C. Bouten, F.P.T. Baaijens, Design of scaffolds for blood vessel tissue engineering using a multi-layering electrospinning technique , Acta Biomaterialia, 1, 575-582, (2005) R. Trickey, F.P.T. Baaijens, A. Laursen, G. Alexopoulos, F. Guilak, Determination of the Poisson\'s ratio of the cell: Recovery properties of chondrocytes after release from complete micropipette aspiration, J. Biomech., .(Accep), ., (2005) D. Gawlitta, C.W.J. Oomens, F.P.T. Baaijens, C.V.C. Bouten, Evaluation of a continuous quantification method of apoptosis and necrosis in tissue cultures, Cytotechnology, 46, 139-150, (2005) A. Driessen - Mol, M.I. van Lieshout, G.C. Dam, S.P. Hoerstrup, F.P.T. Baaijens, C.V.C. Bouten, Fibrin as a cell carrier in cardiovascular tissue engineering applications, Biomaterials, 26(-), 3113-3121, (2005) N.J.B. Driessen, C.V.C. Bouten, F.P.T. Baaijens, Improved prediction of the collagen fiber architecture in the aortic heart valve, J. Biomech. Eng., 127(2), 329-336, (2005) F.P.T. Baaijens, R. Trickey, A. Laursen, F. Guilak, Large deformation finite element analysis of micropipette aspiration to determine the mechanical properties of the chondrocyte, Annals of Biomed.Eng., 33((4)), 494-501, (2005) E.A.G. Peeters, C.W.J. Oomens, C.V.C. Bouten, D.L. Bader, F.P.T. Baaijens, Mechanical and failure properties of single attached cells under compression, J. Biomech., 38(8), 1685-1693, (2005) A. Driessen - Mol, N.J.B. Driessen, M.C.M. Rutten, S.P. Hoerstrup, C.V.C. Bouten, F.P.T. Baaijens, Tissue engineering of human heart valve leaflets: a novel bioreactor for a strain-based conditioning approach, Annals of Biomed.Eng., 33(12), 1778-1788, (2005) E.A.G. Peeters, C.W.J. Oomens, C.V.C. Bouten, D.L. Bader, F.P.T. Baaijens, Viscoelastic properties of single attached cells under compression, J. Biomech. Eng., 127(2), 237 - 243, (2005) 2004R. van Loon, P.D. Anderson, J. de Hart, F.P.T. Baaijens, A combined fictitious domain/adaptive meshing method for fluid-structure interaction in heart valves, Int. J. Numer. Meth. Fluids, 46, 533-544, (2004)N.J.B. Driessen, W. Wilson, C.V.C. Bouten, F.P.T. Baaijens, A computational model for collagen fibre remodelling in the arterial wall, J. Theor. Biol., 226(1), 53-64, (2004) M.M. Verver, J. van Hoof, C.W.J. Oomens, J.S.H.M. Wismans, F.P.T. Baaijens, A finite element model of the human buttocks for prediction , Comp. Meth. Biomech. & Biomed. Engng., 7(4), 193-203, (2004) B.G. Sengers, C.W.J. Oomens, F.P.T. Baaijens, An integrated finite element approach to mechanics, transport and biosynthesis in tissue engineering, J. Biomech. Eng., 126, 82-91, (2004) E.A.G. Peeters, C.V.C. Bouten, C.W.J. Oomens, D.L. Bader, L.H.E.H. Snoeckx, F.P.T. Baaijens, Anisotropic, three-dimensional deformation of single attached cells under compression, Ann. Biomed. Eng., 32(10), 1443-1452, (2004) J. de Hart, G.W.M. Peters, P.J.G. Schreurs, F.P.T. Baaijens, Collagen fibers reduce stresses and stabilize motion of aortic valve leaflets during systole, J. Biomech., 37(3), 303-311, (2004) J.L.V. Broers, E.A.G. Peeters, C.V.C. Bouten, C.W.J. Oomens, B.B. Burke, C.L. Stewart, F.P.T. Baaijens, F.C.S. Ramaekers, Decreased mechanical stiffness in LMNA -/- cells is caused by defective nucleo-skeletal integrity, Human Molecular Genetics, 13(21), 1-14, (2004) J.M.R.J. Huyghe, R. van Loon, F.P.T. Baaijens, Fluid-solid mixtures and electrochemomechanics: the symplicity of Lagragian mixture theory, , 23(2-3), 235-258, (2004) F.M. Hendriks, D. Brokken, C.W.J. Oomens, F.P.T. Baaijens, Influence of hydration and experimental length scale on themechanical response of human skin in vivo, using optical coherence tomography, Skin Res Technol, 10(4), 231-241, (2004) W.M.H. Verbeeten, G.W.M. Peters, F.P.T. Baaijens, Numerical simulations of the planar contraction flow for a polyethylene melt using the XPP model, J. Non-Newtonian Fluid Mech., 117(2-3), 73-84, (2004) A.C.B. Bogaerds, M.A. Hulsen, G.W.M. Peters, F.P.T. Baaijens, Stability analysis of injection molding flows, J. Rheol., 48(4), 765-785, (2004) B.G. Sengers, C.C. van Donkelaar, C.W.J. Oomens, F.P.T. Baaijens, The local matrix distribution and the functional development of tissue engineered cartilage, a finite element study, Ann. Biomed. Eng., 32(12), 1718-1727, (2004) A. Driessen - Mol, C.V.C. Bouten, F.P.T. Baaijens, G. Zund, M.I. Turina, S.P. Hoerstrup, Tissue engineering of semilunar heart valves: current status and future developments, Journal of Heart Valve Disease, 13(-), 272-280, (2004) 2003R. van Loon, J.M.R.J. Huyghe, M.W. Wijlaars, F.P.T. Baaijens, 3D FE implementation of an incompressible quadriphasic mixture model, Int. J. Numer. Meth. Engng, 57(9), 1243-1258, (2003)J. de Hart, G.W.M. Peters, P.J.G. Schreurs, F.P.T. Baaijens, A computational fluid-structure interaction analysis of a fiber-reinforced stentless aortic valve, J. Biomech., 36(5), 699-712, (2003) J.A.W. van Dommelen, W.A.M. Brekelmans, F.P.T. Baaijens, A numerical investigation of the potential of rubber and mineral particles for toughening of semicrystalline polymers, Comp. Mat. Sci., 27, 480-492, (2003) F.M. Hendriks, D. Brokken, J. van Eemeren, C.W.J. Oomens, F.P.T. Baaijens, J.B.A.M. Horsten, A numerical-experimental method to characterize the non-linear mechanical behaviour of human skin, Skin Res Technol, 9(-), 274-283, (2003) R.G.M. Breuls, C.W.J. Oomens, C.V.C. Bouten, D.L. Bader, F.P.T. Baaijens, A Theoretical Analysis of Damage Evolution in Skeletal Muscle Tissue with Reference to Pressure Ulcer, J. Biomech. Eng., 125(6), 902-909, (2003) J. de Hart, G.W.M. Peters, P.J.G. Schreurs, F.P.T. Baaijens, A three-dimensional computational analysis of fluid-structure interaction in the aortic valve, J. Biomech., 36(1), 103-112, (2003) J. van Meerveld, M.M. Molenaar, J.M.R.J. Huyghe, F.P.T. Baaijens, Analytical solution of compression, free swelling and electrical loading of saturated charged porous media., Transp. Porous Media, 50(1-2), 111-126, (2003) R.G.M. Breuls, C.V.C. Bouten, C.W.J. Oomens, D.L. Bader, F.P.T. Baaijens, Compression induced cell damage in engineered muscle tissue: an in-vitro model to study pressure ulcer aetiology, Ann. Biomed. Eng., 31(11), 1357-1365, (2003) N.J.B. Driessen, R.A. Boerboom, J.M.R.J. Huyghe, C.V.C. Bouten, F.P.T. Baaijens, Computational analyses of mechanically induced collagen fiber remodeling in the aortic heart valve, J. Biomech. Eng., 125(4), 549-557, (2003) R.A. Boerboom, N.J.B. Driessen, C.V.C. Bouten, J.M.R.J. Huyghe, F.P.T. Baaijens, Finite Element Model of Mechanically Induced Collagen Fibre Synthesis and Degradation in the Aortic Valve, Ann. Biomed. Eng., 31(9), 1040-1053, (2003) C.W.J. Oomens, M. Maenhout, C.H.G.A. van Oijen, M. Drost, F.P.T. Baaijens, Finite element modelling of contracting skeletal muscle, Phil Trans R Soc Lon B, 358(1437), 1453-1460, (2003) F.N. van de Vosse, J. de Hart, C.H.G.A. van Oijen, D. Bessems, A. Segal, B.J.B.M. Wolters, J.M.A. Stijnen, F.P.T. Baaijens, Finite-element-based computational methods for cardiovascular fluid-structure interaction, J. Eng. Math., 47, 335-368, (2003) C.V.C. Bouten, R.G.M. Breuls, E.A.G. Peeters, C.W.J. Oomens, F.P.T. Baaijens, In-vitro models to study compressive strain-induced muscle cell damage, Biorheology, 40(1-3), 383-388, (2003) J.A.W. van Dommelen, D.M. Parks, M.C. Boyce, W.A.M. Brekelmans, F.P.T. Baaijens, Micromechanical modeling of intraspherulitic deformation of semicrystalline polymers, Polymer, 44, 6089-6101, (2003) J.A.W. van Dommelen, W.A.M. Brekelmans, F.P.T. Baaijens, Micromechanical modeling of particle-toughening of polymers by locally induced anisotropy, Mech. Mat., 35(9), 845-863, (2003) J.A.W. van Dommelen, D.M. Parks, M.C. Boyce, W.A.M. Brekelmans, F.P.T. Baaijens, Micromechanical modeling of the elasto-viscoplastic behavior of semi-crystalline polymers, J. Mech. Phys. Solids, 51, 519-541, (2003) R.G.M. Breuls, A. Driessen - Mol, R. Petterson, C.W.J. Oomens, F.P.T. Baaijens, C.V.C. Bouten, Monitoring local cell viability in engineered tissue. A fast, quantitative and non-destructive approach, Tissue Engineering, 9(2), 269-281, (2003) E.A.G. Peeters, C.V.C. Bouten, C.W.J. Oomens, F.P.T. Baaijens, Monitoring the biomechanical response of individual muscle cells under compression: a new compression device, Med. Biol. Engng. Comp., 41(4), 498-503, (2003) J.A.W. van Dommelen, W.A.M. Brekelmans, F.P.T. Baaijens, Multiscale modeling of particle-modified polyethylene, J. Mat. Sci., 38, 4393-4405, (2003) R.A.B. Engelen, M.G.D. Geers, F.P.T. Baaijens, Nonlocal implicit gradient-enhanced elasto-plasticity for the modelling of softening behaviour, Int. J. Plasticity, 19(4), 403-433, (2003) E.M.H. Bosboom, C.V.C. Bouten, C.W.J. Oomens, F.P.T. Baaijens, K. Nicolaij, Quantifying pressure sore related muscle damage using high-resolution MRI, J. Appl. Physiol., 95, 2235 - 2240, (2003) N.J.B. Driessen, G.W.M. Peters, J.M.R.J. Huyghe, C.V.C. Bouten, F.P.T. Baaijens, Remodelling of continuously distributed collagen fibres in soft connective tissues, J. Biomech., 36(8), 1151-1158, (2003) M. Drost, M. Maenhout, P.J.B. Willems, C.W.J. Oomens, F.P.T. Baaijens, M.K.C. Hesselink, Spatial and temporal heterogeneity of superficial muscle strain during in situ fixed-end contractions, J. Biomech., 36(7), 1055-1063, (2003) C.V.C. Bouten, C.W.J. Oomens, F.P.T. Baaijens, D.L. Bader, The aetiology of pressure sores: skin deep or muscle bound?, Arch. Phys. Med. Rehab., 84(4), 616-619, (2003) P. Zuidema, L.E. Govaert, F.P.T. Baaijens, P.A.J. Ackermans, S. Asvadi, The influence of humidity on the viscoelastic behaviour of human hair, Biorheology, 40(4), 431-439, (2003) A. Driessen - Mol, C.V.C. Bouten, G. Zund, C. Guenter, J.F. Visjager, M.I. Turina, F.P.T. Baaijens, S.P. Hoerstrup, The relevance of large strains in functional tissue engineering of heart valves, Thorac. Cardiovasc. Surg., 51, 78-83, (2003) A.C.B. Bogaerds, M.A. Hulsen, G.W.M. Peters, F.P.T. Baaijens, Time Dependent Finite Element Analysis of the Linear Stability of Viscoelastic Flows with Interfaces, J. Non-Newtonian Fluid Mech., 116(1), 33-54, (2003) 2002P. Harrison, L.J..P. Janssen, V.P. Navez, G.W.M. Peters, F.P.T. Baaijens, Birefringence measurements on polymer melts in an axisymmetric flowcell, Rheol. Acta, 41(1-2), 114-133, (2002)A.M. Goijaerts, L.E. Govaert, F.P.T. Baaijens, Experimental and numerical investigation on the influence of processing speed on the blanking process, J. Manufact. Sci. Eng., 124, 416-419, (2002) B.J.E. van Rens, W.A.M. Brekelmans, F.P.T. Baaijens, Modeling friction near sharp edges using a Eulerian reference frame: appliction to aluminium extrusion, Int. J. Numer. Meth. Engng, 54, 453-471, (2002) A.M. Grillet, A.C.B. Bogaerds, G.W.M. Peters, M.J.H. Bulters, F.P.T. Baaijens, Numerical analysis of flow mark, J. Rheol., 46(3), 651-670, (2002) R.G.M. Breuls, B.G. Sengers, C.W.J. Oomens, C.V.C. Bouten, F.P.T. Baaijens, Predicting local cell deformations in engineered tissue constructs: A multilevel finite element approach. , J. Biomech. Eng., 124, 198 - 207, (2002) A.M. Grillet, A.C.B. Bogaerds, G.W.M. Peters, F.P.T. Baaijens, Stability analysis of constitutive equations for polymer melts in viscometric flows, J. Non-Newtonian Fluid Mech., 103(5), 221-250, (2002) A.C.B. Bogaerds, A.M. Grillet, G.W.M. Peters, F.P.T. Baaijens, Stability Analysis of Polymer Shear Flows Using the Extended Pom-Pom Constitutive Equations , J. Non-Newtonian Fluid Mech., 108(1-3), 187-208, (2002) J.F. Agassant, F.P.T. Baaijens, H. Bastian, A. Bernnat, A.C.B. Bogaerds, T. Coupez, B. Debbaut, A.L. Gavrus, A. Goublomme, M. van Gurp, R.J. Koopmans, M.H. Laun, K. Lee, O.H. Nouatin, M.R. Mackley, G.W.M. Peters, G. Rekers, W.M.H. Verbeeten, B. Vergnes, M.H. Wagner, E. Wassner, W.F. Zoetelief, The Matching of Experimental Polymer, International Polymer Processing, 17(1), 3-10, (2002) W.M.H. Verbeeten, G.W.M. Peters, F.P.T. Baaijens, Viscoelastic analysis of complex polymer melt flows using the extended Pom-Pom model, J. Non-Newtonian Fluid Mech., 108(1-3), 301-326, (2002) 2001F.P.T. Baaijens, A fictitious domain/mortar element, Int. J. Numer. Meth. Fluids, 35, 743-761, (2001)V. Kouznetsova, W.A.M. Brekelmans, F.P.T. Baaijens, An approach to micro-macro modeling of heterogeneous materials, Comp. Mech., 27, 37-48, (2001) W.M.H. Verbeeten, G.W.M. Peters, F.P.T. Baaijens, Differential constitutive equations for polymer melts: The extended Pom-Pom model , J. Rheol., 45(4), 823-843, (2001) A.M. Goijaerts, L.E. Govaert, F.P.T. Baaijens, Evaluation of Ductile Fracture Models for various Materials in Metal Blanking, J. Mat. Proc. Techn., 110(3), 312-323, (2001) M.A.H. van der Aa, P.J.G. Schreurs, F.P.T. Baaijens, Modelling of the wall ironing process of polymer coated sheet metal, Mech. Mat., 33, 555-572, (2001) E.M.H. Bosboom, M.K.C. Hesselink, C.W.J. Oomens, C.V.C. Bouten, M. Drost, F.P.T. Baaijens, Passive transverse mechanical properties of skeletal muscle under in-vivo compression, J. Biomech., 34(10), 1365-1368, (2001) E.M.H. Bosboom, C.V.C. Bouten, C.W.J. Oomens, H. van Straaten, F.P.T. Baaijens, H. Kuipers, Quantification and localisation of damage in rat muscles after controlled loading; a new approach to study the aetiology of pressure sores, Med. Eng. Phys., 23(3), 195-200, (2001) L.V. Raulea, A.M. Goijaerts, L.E. Govaert, F.P.T. Baaijens, Size effects in the processing of thin metal sheets, J. Mat. Proc. Techn., 115(1), 44-48, (2001) 2000G. Cacciola, G.W.M. Peters, F.P.T. Baaijens, A synthetic fiber-reinforced stentless heart valve., J. Biomech., 33, 653-658, (2000)J. de Hart, G.W.M. Peters, P.J.G. Schreurs, F.P.T. Baaijens, A two-dimensional fluid-structure interaction model of the aortic valve, J. Biomech., 33, 1079-1088, (2000) H.C.E. van der Aa, M.A.H. van der Aa, P.J.G. Schreurs, F.P.T. Baaijens, W.J. van Veenen, An experimental and numerical study of the wall ironing process of polymer coated sheet metal, Mech. Mat., 32, 423-443, (2000) A.M. Goijaerts, Y.W. Stegeman, L.E. Govaert, D. Brokken, W.A.M. Brekelmans, F.P.T. Baaijens, Can a new experimental and numerical study improve metal blanking? , J. Mat. Proc. Techn., 103, 44-50, (2000) L.H. Genieser, C.P. Hendriks, F.P.T. Baaijens, H.E.H. Meijer, Characterization of elastomer sliding behavior across silica and polydimethylsiloxane grafted surfaces., J. Rheol., 44(5), 1003-1017, (2000) J.A.W. van Dommelen, W.A.M. Brekelmans, F.P.T. Baaijens, Computational visco-plasticity for kinematically constrained crystals, Int. J. Numer. Meth. Engng, 48, 1311-1330, (2000) D. Brokken, W.A.M. Brekelmans, F.P.T. Baaijens, Discrete ductile fracture modelling for the metal blanking process, Comp. Mech., 26, 104-114, (2000) D. Brokken, W.A.M. Brekelmans, F.P.T. Baaijens, Predicting the shape of blanked products: a finite element approach, J. Mat. Proc. Techn., 103, 51-56, (2000) A.M. Goijaerts, L.E. Govaert, F.P.T. Baaijens, Prediction of ductile fracture in metal blanking, J. Manufact. Sci. Eng., 122, 476-483, (2000) 1999A.C.B. Bogaerds, W.M.H. Verbeeten, G.W.M. Peters, F.P.T. Baaijens, 3D viscoelastic analysis of a polymer solution in a complex flow, Comput. Methods. Appl. Mech. Engrg., 180, 413-430, (1999)Y.W. Stegeman, A.M. Goijaerts, D. Brokken, W.A.M. Brekelmans, L.E. Govaert, F.P.T. Baaijens, An experimental and numerical study of a planar blanking process, J. Mat. Proc. Techn., 87, 266-276, (1999) G.W.M. Peters, J.F.M. Schoonen, F.P.T. Baaijens, H.E.H. Meijer, On the performance of enhanced constitutive models for polymer melts in a cross-slot flow, J. Non-Newtonian Fluid Mech., 82, 387-427, (1999) J.M.J. den Toonder, J.A.W. van Dommelen, F.P.T. Baaijens, The relation between single crystal elasticity and the effective elastic behaviour of polycrystalline materials: theory, measurement and computation , Model. Simul. Mater. Sci. Engng., 7, 909-928, (1999) 1998J.F.M. Schoonen, F.H.M. Swartjes, G.W.M. Peters, F.P.T. Baaijens, H.E.H. Meijer, A 3D Numerical/Experimental Study on a Stagnation Flow of a Polyisobuthylene Solution, J. Non-Newtonian Fluid Mech., 79(2-3), 529-561, (1998)B.J.E. van Rens, D. Brokken, W.A.M. Brekelmans, F.P.T. Baaijens, A two-dimensional paving mesh generator for triangles with controllable aspect ratio and quadrilaterals with high quality, Engineering with Computers, 14, 248-259, (1998) F.P.T. Baaijens, An interative solver for the DEVSS/DG method with application to smooth and non-smooth flows of the upper convected Maxwell fluid, J. Non-Newtonian Fluid Mech., 75, 119-138, (1998) M.H.H. Meuwissen, C.W.J. Oomens, F.P.T. Baaijens, R. Petterson, J.D. Janssen, Determination of Elasto-plastic Properties of Aluminium using a Mixed Numerical-Experimental Method, J. Mat. Proc. Techn., 75(1-3), 204-211, (1998) B.J.E. van Rens, W.A.M. Brekelmans, F.P.T. Baaijens, Homogenization of the elastoplastic behavior of perforated plates, Computers and Structures, 69, 537-545, (1998) F.P.T. Baaijens, Mixid finite element method for viscoelastic flow analysis: a riview, J. Non-Newtonian Fluid Mech., 79(2), 361-386, (1998) D. Brokken, W.A.M. Brekelmans, F.P.T. Baaijens, Numerical modelling of the metal blanking process, J. Mat. Proc. Techn., 83, 192-199, (1998) 1997G.W.M. Peters, F.P.T. Baaijens, Modelling of non-isothermal viscoelastic flows, J. Non-Newtonian Fluid Mech., 68, 205-224, (1997)F.P.T. Baaijens, S.H.A. Selen, J.P.W. Baaijens, G.W.M. Peters, H.E.H. Meijer, Viscoelastic flow past a confined, J. Non-Newtonian Fluid Mech., 68, 173-203, (1997) 1995L.F.A. Douven, F.P.T. Baaijens, H.E.H. Meijer, The computation of properties of injection-moulded products, Prog. Polym. Sci., 20, 403-457, (1995)J.P.W. Baaijens, G.W.M. Peters, F.P.T. Baaijens, H.E.H. Meijer, Viscoelastic flow past a confined cylinder of a polyisobutylene solution, J. Rheol., 39, 1243-1277, (1995) 1994F.P.T. Baaijens, J.P.W. Baaijens, G.W.M. Peters, H.E.H. Meijer, An experimental and numerical investigation of a viscoelastic flow around a cylinder, J. Rheol., 38(2), 351-376, (1994)F.P.T. Baaijens, Application of low-order Discontinuous Galerkin methods to the analysis of viscoelastic flows, J. Non-Newtonian Fluid Mech., 52, 37-57, (1994) F.P.T. Baaijens, Numerical experiments with a Discontinuous Galerkin method including monotonicity enforcement on the stick-slip problem, J. Non-Newtonian Fluid Mech., 51, 141-159, (1994) 1993F.P.T. Baaijens, An U-ALE formulation of 3-D unsteady viscoelastic flow, Int. J. Numer. Meth. Engng, 36, 1115-1143, (1993)C.M. Kootwijk, F.P.T. Baaijens, Application of the Satisfying-Babuska-Brezzi method to a two dimensional diffusion problem, Appl. Math. Modelling, 17, 184-193, (1993) F.P.T. Baaijens, Numerical analysis of start-up planar and axi-symmetric contraction flows using multi-mode differential constitutive models, J. Non-Newtonian Fluid Mech., 48, 147-180, (1993) More publicationsAn extended list of publications of Frank Baaijens can be found here. |
||||||||||||||
